LET YOUR FINGERTIPS TURN YOUR LIGHTING ON AS YOU WISH   

Using this mini-module connected behind your existing switch, you can turn your traditional light into an intelligent light. Then, you just have to choose how you want to control it:
- With a wireless switch you can install anywhere in your home without any wiring;
- With the remote control fob always at hand;
- With your smartphone (via the HomeBox) to programme, control and check if your light is turned on or off from wherever you are;
- Or to do it automatically with the movement or door/window open detector.

In addition, intelligent control of your lighting lets you control your lights individually, as a group or automatically, for example by turning off all your lights with a single gesture when going to sleep.

In addition, when installing it, you can choose to use the mini-module in dimmer mode (this mode must be used with an LED or dimmable ECO bulb), to adjust the brightness of your lighting instantly using your DIO controller and create the ambience you desire, depending on the room, the time of day or what you are doing.

>>>ALL OUR SMART LIGHTING SOLUTIONS

QUICK AND EASY INSTALLATION  

Installing an intelligent lighting module is very simple, without the need to modify your existing electrical installation.

You just have to connect the mini-module behind your existing switch (neutral not required), choose your DiO 2.0 controller and link them in just 2 clicks.

When installing, you can choose to move the pairing button located on the module to a DiO 2.0 switch (model ED-SW-01/02/03/04) so you can add new DiO controllers, without having to access the module.

The lighting mini-module is compatible with all DiO 2.0 controllers and detectors:
- Remote control,
- Wireless switches,
- HomeBox for control through your smartphone,
- Motion and door/window opening detectors. 

TAILORED TO YOUR LIFESTYLE FOR ADDED SAVINGS AND SECURITY

Make everyday living easier by connecting your lighting to your smartphone through the DiO HomeBox. Using the free application, you can programme time slots, control a group of lights with a single switch, or create customised scenarios.

For example, by simply clicking on a DiO wireless switch, you can turn off all the lights on one floor or the whole house, and with additional modules you can even close your roller shutters as well.

You can also automate your lighting without going through your smartphone with our motion and open detectors, so that your lights come on when you enter the room and go off after the allotted time, for example.

As well as improved day-to-day comfort, you also save a significant amount of energy, by not leaving some of your house lights on unnecessarily, and keep your home secure by simulating someone being there when you are on holiday.

DiO 2.0 – THE SOLUTION TO INCREASED PERFORMANCE 

The main benefit of DiO 2.0 products is their long free-field radio transmission distance of up to 150 m, so they can operate throughout the house.

In addition, they are ideal for checking the status of your devices through your smartphone using status feedback, so you can check if your lights are turned on or off, your shutters open or closed, your heating switched on, etc.

Lastly, DiO 2.0 modules and sockets have advanced options such as the signal repeater, doubling the transmission distance.

DiO 1.0 and DiO 2.0 products do not operate on the same radio frequency and are therefore not compatible. However, you can use them together through the smart home system, which will link them and enable you to use a DiO 1.0 remote control to turn on a lamp connected to a DiO 2.0 module, for example.